Helyers Tree Surgery.

Home
Tree Works
Tree consultancy
Blockpaving drives
Patios and new gardens
Fencing and gates
Brickwork and walls
Health & Safety
Meet The Staff
Contact Us
Links
Finding us

Helyers Tree Surgery.

Please install Flash® and turn on Javascript.

Crown Reduction.
A crown reduction (usually expressed in percentage terms) is a decrease in the extent of the crown spread. Carried out sensitively to retain an attractive shape.

Re-shaping.

Pruning a tree or shrub sympathetically to re-establis

h an aesthetically pleasing shape. Usually necessary when a tree has not been maintained for some time or has been pruned incorrectly in the past.

Tree Removal.

In our working environments this is normally done by dismantling a section at a time. Trees are taken down as near as possible to ground level or alternatively, may be left as a high stump for the benefit of wildlife.

Crown Cleaning.
Removing dead or defective branches, or branches that have grown across one another. This is usually necessary for safety reasons.

Deadwooding.
The removal for safety reasons of any dead wood from the tree’s crown. Deadwood can soon be dislodged in the wind and can cause damage or injury.

Crown Thining.
Removing branches from the crown of a tree without reducing the height or the spread. This prevents the tree from becoming too dense, stops the tree from casting too much shade and is a useful method for allowing more daylight into nearby properties whilst retaining the tree’s size. It also helps the wind to blow through a tree that may be susceptible to wind damage. Whilst crown thinning, we also remove any deadwood and defective branches.

Crown lifting
(Usually expressed in metres from ground level). The removal of lower branches to allow room beneath the tree for passing vehicles, mowing, pedestrians etc.

woodchipping.
We process the small and large wood tree waste through a 14" wood chipper. The wood chips are directed straight into our vehicle where we take it away. Alternatively, we can leave them in a pile for your own use on request.

We can also chip up tree waste that you have created.

Pollarding.
This is a tree surgery technique for controlling a tree’s size. This method is often used for street trees and trees in a confined area. It involves the removal of branches at a given height. The tree is unsightly until foliage regrows from the branch stubs. The sprouting foliage develops into a new dense, but weaker branch system. Pollarding must be carried out regularly for safety reasons and to maintain the tree to the desired size.

Stump Grinding.
Mechanically removing a tree stump so that the ground can be re-used. This involves the use of a stump grinder, a portable power tool (it can be of various sizes), chips away at the wood to 30-45cm below ground level, using a rotating cutting disk.

Grubbing Out.
Digging out woody vegetation without the use of machine. Normally done for small tasks or when lack of space prevents the use of a stump grinder.

Site Clearance.
Completely removing all woody vegetation from a plot of land.

Hedge Cutting.
Trimming off and removing new growth from the hedges, also reducing hedges by any height using petrol hedge trimmers ,and chainsaws leaving a neat and tidy hedge.

01329 662647